-
EnterKeyword - |
- |
- |
- |
- |
-
Downloads
- |
-
Products & Solutions
- Irrigation
- Agriculture
- Landscape
- Waterworks
- Municipal
- Buildings
- Fire Protection
- Fire Protection
- |
-
About Us
FP 450-65
Level Control Valve
The Model FP 450-65 Level Control Valve with Bi-Level Electric Float is a hydraulically operated, diaphragm actuated, control valve that controls reservoir filling in response to an electric float switch signal. The valve fully opens at pre-set low level and shutts at pre-set high level.
Features and Benefits
- Line-pressure driven – Independent operation
- Bi-Level electric float switch
- On/off service
- No hydraulic sensing tubes
- Suited to various float switches
- Solenoid controlled
- Low power consumption
- Normally Open or Normally Closed main valve
- Fully supported vulcanized diaphragm
- Rugged radial seal disk
- Protected diaphragm
- Dynamically restrained actuation
- Non-slam closing
- Balanced rolling-diaphragm
- High flow capacity
- Very low opening & closing pressure requirement
- In-line serviceable – Easy maintenance
- Flexible design – Easy addition of features
- External installation – Pilot operated
Typical Applications
Infrastructure Installation
Reservoirs vary in their characteristics – location, elevation, filling and emptying flow and pressure, surface area, etc.
These various characteristics require various level control valve solutions.
The Model FP 450-65 is the ideal solution for level control in reservoirs – shallow and deep, low and high elevation, rooftop and basement, in water towers, and wherever electric power is available.
Operation
The Model FP 450-65 Level Control Valve with Bi-Level Electric Float is a hydraulically operated, diaphragm actuated, control valve that controls reservoir filling in response to an electric float switch signal. The valve opens at pre-set low level and shuts off at pre-set high level.
