1½”- PRV

The BERMAD Adjustable Direct Acting Pressure Reducer is
actuated by a pressure responsive diaphragm, which seeks
to reach equilibrium between hydraulic and set spring force.
The BERMAD Model 1½”-PRV brass body and reinforced
plastic actuator assembly endow it with excellent hydraulic
performance capabilities and particularly high mechanical
strength. Supplied with a special throttling plug and
elastomeric seal, it reduces higher upstream pressure
to lower constant downstream pressure even under
conditions of near zero demand, and seals drip-tight under
no-flow conditions.

¾”- PRV-05

The BERMAD Adjustable Direct Acting Low Flow Pressure
Reducer is actuated by a pressure responsive diaphragm,
which seeks to reach equilibrium between hydraulic and
set spring force. The BERMAD Model ¾”-PRV-05 is built
of reinforced plastic that endows it with excellent hydraulic
performance capabilities and high mechanical strength
.Supplied with a special throttling plug and elastomeric
seal, it reduces higher upstream pressure to lower constant
downstream pressure even under conditions of near
zero demand.

¾”- PRV

The BERMAD Adjustable Direct Acting Pressure Reducer is
actuated by a pressure responsive diaphragm, which seeks
to reach equilibrium between hydraulic and set spring force.
The BERMAD Model ¾”-PRV is built of reinforced plastic that
endows it with excellent hydraulic performance capabilities
and high mechanical strength. It reduces higher upstream
pressure to lower constant downstream pressure regardless
of fluctuating demand or varying upstream pressure.

2”- PRV

The BERMAD Direct Acting Pressure Reducer is actuated
by a pressure responsive piston, which seeks to reach
equilibrium between hydraulic and set spring force.
The BERMAD Model 2”-PRV brass body and reinforced
plastic actuator assembly endow it with excellent hydraulic
performance capabilities and particularly high mechanical
strength. Supplied with a special throttling plug, it reduces
higher upstream pressure to lower constant downstream
pressure even under conditions of near zero demand,
and seals drip-tight under no-flow conditions.

1”- PRV-05

The BERMAD Adjustable Direct Acting Low Flow Pressure
Reducer is actuated by a pressure responsive diaphragm,
which seeks to reach equilibrium between hydraulic and
set spring force. The BERMAD Model 1”-PRV-05 is built
of reinforced plastic that endows it with excellent hydraulic
performance capabilities and high mechanical strength.
Supplied with a special throttling plug and elastomeric seal,
it reduces higher upstream pressure to lower constant
downstream pressure even under conditions of near
zero demand.

1”- PRV

The BERMAD Adjustable Direct Acting Pressure Reducer is
actuated by a pressure responsive diaphragm, which seeks
to reach equilibrium between hydraulic and set spring force.
The BERMAD Model 1”-PRV is built of reinforced plastic that
endows it with excellent hydraulic performance capabilities
and high mechanical strength. It reduces higher upstream
pressure to lower constant downstream pressure regardless
of fluctuating demand or varying upstream pressure.

DPRV-CAP1

Spring loaded, direct acting pressure reducing valve that reduces a high upstream pressure to a lower, constant downstream pressure, regardless of fluctuating demand or varying upstream pressure.

The pre-calibrated device is easily adjustable using an adjustment knob with setting indicator.
This model is often used as a low flow bypass on larger piloted pressure reducing valves like the BERMAD 720-2B or 420-2B.
The BERMAD DPRV-CAP1 series are certified according to the EN 1567 standard for use with hot water up to 80°C. In addition, they are certified in accordance with the WRAS specifications.

BC-DPRV-#2HC-P

 

Spring loaded, direct acting pressure reducing valve that reduces a high upstream pressure to a lower, constant downstream pressure, regardless of fluctuating demand or varying upstream pressure.
This model is often used as a pilot control for various Bermad pilot operated models.

BC-DPRV-#3HC-P

 

Spring loaded, direct acting relief valve that relieves excessive system pressure when such pressure rises above a preset value.

It responds immediately, accurately, and with high repeatability to a rise in system pressure by opening fully.

This model is often used as a pilot control for various Bermad pilot operated models.

IR 1″-PRV

The BERMAD Adjustable Direct Acting Pressure Reducer is actuated by a pressure responsive diaphragm, which seeks to reach equilibrium between hydraulic and set spring force. The BERMAD Model 1”-PRV is built of reinforced plastic that endows it with excellent hydraulic performance capabilities and high mechanical strength. It reduces higher upstream pressure to lower constant downstream pressure regardless of fluctuating demand or varying upstream pressure.

IR 1″-PRV-05

The BERMAD Adjustable Direct Acting Low Flow Pressure Reducer is actuated by a pressure responsive diaphragm, which seeks to reach equilibrium between hydraulic and set spring force. The BERMAD Model 1”-PRV-05 is built of reinforced plastic that endows it with excellent hydraulic performance capabilities and high mechanical strength. Supplied with a special throttling plug and elastomeric seal, it reduces higher upstream pressure to lower constant downstream pressure even under conditions of near zero demand.