S-392T-2W

The BERMAD Model S-392T-2W is a compact 2-Way Latching
Solenoid Actuator, specially designed for reliable long life service
in irrigation systems controlled by Battery Operated Controllers.
The BERMAD latching Solenoid Actuator is applicable directly to
the valve cover or with a 2 Way Trio base that enables combining
it in variety of 2-way control circuits. Model S-392T-2W consumes
power only when switching positions, using a very short electric
impulse. This prolongs life of batteries and enables solar recharging.

S-395T-2W

The BERMAD Model S-395T-2W is a compact 2-Way Latching
Solenoid Actuator, specially designed for reliable long life service
in irrigation systems controlled by Battery Operated Controllers.
The BERMAD latching Solenoid Actuator is applicable directly to the
Trio valve cover or with a 2-Way Trio Base that enables combining
it in variety of 2-way control circuits. Model S-395T-2W consumes
power only when switching positions, using a very short electric
pulse. This prolongs life of batteries and enables solar recharging.

S-400-3W

The BERMAD S-400-3W is a compact 3-Way Solenoid
Pilot Valve that can control valves independently or in
combination with other control circuit accessories. It excels
in its low power consumption and low sensitivity to dirt
and voltage variations. The Model S-400-D-3W-BB, due
to its internal diode rectifier, provides remarkable high
switching power. The Model S-400-R-3W-BB is lightningresistant.
The hydraulic base features a manual override
and consists of a bracket for attaching to the valve or to
a solenoid manifold.

Ex d Flameproof Type

 

These Ex d solenoid valves are equipped with a heavy-duty enclosure of flameproof design, suited for use where hazardous materials are present intermittently as defined by zones 1 or zone 2, Group II apparatus category according to the ATEX 94/9/EC Directive.

Suitable for outdoor industrial applications, the solenoid’s enclosure and construction is designed to withstand and contain an internal explosion. The coil is IP66 (minimum) ingress protection rated, continuous duty design with class H high temperature insulation rating.

These solenoid valves are suitable for activating BERMAD Deluge and water control valves, for use with filtered firewater or a pneumatic pressure supply.