Katup Pengurang Tekanan Biasanya Tertutup Dengan Relay Hidrolik
Katup Pengurang Tekanan BERMAD Normally Closed dengan kontrol relay hidraulik adalah katup kontrol yang dioperasikan secara hidraulik dan digerakkan oleh diafragma, yang mengurangi tekanan hulu yang lebih tinggi menjadi tekanan hilir yang lebih rendah dan konstan tanpa terpengaruh oleh fluktuasi permintaan, serta akan terbuka sepenuhnya saat terjadi penurunan tekanan pada saluran. Ini adalah katup normally closed, yang akan terbuka sebagai respons terhadap perintah tekanan jarak jauh dan menutup jika perintah tersebut tidak ada.
Butuh informasi lebih lanjut? Hubungi kami di sini
-
Line Pressure Driven Hydraulic Control Valve Normally Close
- Protects downstream systems
- Opens fully upon line pressure drop
- Amplifies and relays weak remote commands
- Closes upon command pressure failure
-
Engineered Composite Valve with Industrial Grade Design
- Adaptable on-site to a wide range of end connection
- Articulated flange connections that eliminate line bending and hydraulic stresses
- Highly durable, chemical and cavitation resistant
-
hYflow 'Y' Valve Body with "Look Through" Design
- Ultra-high flow capacity at low pressure loss
-
Unitized "Flexible Super Travel" (FST) Diaphragm and Guided Plug
- Accurate and stable regulation with smooth closing
- Requires low actuation pressure
- Prevents diaphragm erosion and distortion
- Simple in-line inspection and service
Aplikasi Umum
- Automated Irrigation Systems
- Pressure Reducing Systems
- Systems Subject to Varying Supply Pressure
- Distribution Centers
- Energy Saving Irrigation Systems
Fitur Tambahan
- M : Flow Stem (*Exclude sizes 4"L, 6"R)
- 5 : Plastic Test Point
- Z : Manual Selector
- V3 : Victaulic PVC Adaptors 3"
- V4 : Victaulic PVC Adaptors 4"