TOO

 

The BERMAD model TOO is a specific gravity sensitive valve, for the automatic draining of a heavier fluid from a lighter fluid.

Commonly used for the draining of water accumulated in the bottom of petroleum product storage tanks where the stored medium has a lower specific gravity than that of the accumulated water.

The TOO valve should be opened to initiate dewatering. When all the accumulated water has drained from the storage tank the presence of product will be sensed by the TOO valve and it will automatically and immediately shut off drip tight. When fitted with the optional factory

fitted limit switch, a signal can be sent to a remote valve position monitoring system, signaling that the valve is closed.

It is well suited for use with storage tanks containing Gasoline, Gas Oil, Jet Fuel, Kerosene, Diesel Oil, Crude Oil and all Petroleum products including Light Crude Oil. The TOO uses a simple and reliable principle with a straightforward and compact construction, designed to require

minimal maintenance, and to last the lifetime of the tank.

Using the TOO can save product loss, work hours, and increase available tank storage space. It is environmentally cleaner, safer, more reliable and efficient compared to manual or other methods

Each valve is assembled and tested in the BERMAD ISO 9000 and

9001 certified manufacturing plant.

Introduced to the industry in 1997 the TOO is a time proven product in use in over 20 countries worldwide and backed by the Global Service Network of BERMAD.

TOR

 

The BERMAD model TOR is a normally open specific gravity sensitive valve, which closes upon sensing the lighter of two fluids. It is commonly used as a safety requirement for the

draining of rainwater from floating roofs of petroleum product storage tanks. In the event of storage product ingress into the drain tubing, the BERMAD TOR Valve will sense the presence of

the product and will immediately close, preventing product loss and spillage.

The BERMAD model TOR is a normally open valve installed on the outlet drain pipeline exiting the storage tank. It presents a constant open passage ready to drain any water that accumulates on the storage tank roof and ready to immediately close in the event of product ingress into the drain system.

When the TOR closes, the factory fitted magnetic proximity switch can immediately send a feedback signal to a remote position monitoring system, alerting the relevant authority and

enabling speedy corrective action.

It uses a simple reliable principle with a straightforward and compact construction. The TOR is designed to require minimum maintenance, and to last the lifetime of the tank.

Each valve is assembled and fully tested in the BERMAD ISO 9000 and 9001 certified manufacturing plant.

Introduced to the industry in 1997 the TOR is a time proven product in use in over 20 countries worldwide and backed by the Global Service Network of BERMAD