Water Control Solutions
This Swing Check Valve is intended for installation in Preaction systems using supervisory pressure as low as 1 psi. The Swing Check Valve provides compact, lightweight design for easy and comfortable installation. Its hydraulically streamlined body design and spring loaded elastomer faced clapper, present a very low friction loss, non-slam closing characteristics and leak free sealing.
The Y Strainer with a stainless steel or v screen is used in all BERMAD Water Control Valves, including Deluge Valves, Preaction Valves, Pressure Control Valves, Monitor Valves and Remote Control Valves. The Y Strainer is located at the pressure supply or priming line to protect the control trim components from suspended particles or … read more
This 2-way, modulating horizontal float, is actuated by a float either pulling the float pilot arm down, when level drops, or floating it up when level rises. The float pilot throttles closed as level rises towards set-point, eventually closing drip-tight.
These spring loaded check valves are normally closed with a straight flow poppet design, allowing free flow in one direction, while preventing flow in the opposite direction. The internal spring enhances the sealing and the immediate closing properties of the check valve. Being spring loaded these check valves are suitable for installation in any position, horizontal, vertical or … read more
The BERMAD Closing Speed Control Device (CSCD) is a valve control accessory used to adjust the closing speed of BERMAD valves. The CSCD controls the Main Valve Closing Speed by enabling the adjustment and setting of the water flow rate that is introduced to the BERMAD valve’s control chamber upon a closing command. This allows the operator to … read more
The BERMAD Opening Speed Control Device (OSCD) is a valve control accessory that has an adjustable restricted flow in one flow direction and an unrestricted flow in the opposite direction. The OSCD is designed to be installed on the control trim of BERMAD valves, to reduce the opening speed and thus decrease or eliminate damaging water surge … read more
The Priming Restriction is a flow restriction component used as an integral orifice in the control trim of BERMAD Deluge Valves. In addition it incorporates two ¼ inch NPT (F) ports to enable a priming pressure connection to supplementary instruments like a solenoid or relay valve. The internal restriction orifice is available in a number of diameters, … read more
The Large Control Filter has a high capacity and a large screening area. It is used where control fluid might be dirtier than is usual, and the standard control filter would be inadequate. This larger control filter increases the valve system reliability, and prevents a false operation of deluge systems that might occur due to a clogged control priming line.
The BERMAD Alarm Trim Valve Assembly includes a 3-Way ball valve with a position plate. This valve enables fire alarm testing on BERMAD deluge valves without actuating the deluge valve. There are 3 positions for this valve. The function of each position is indicated on a Stainless steel plate located opposite of the valve handle. STAND BY – … read more
These ball valves are 2-way floating ball type. They Provide quick, reliable and easy on/off control for manual release, isolating valves and drains.
BERMAD C70 is a high quality combination air valve for a variety of water networks and operating conditions. It evacuates air during pipeline filling, allows efficient release of air pockets from pressurized pipes, and enables large volume air intake in the event of network draining. With its advanced aerodynamic design, double orifice and anti-slam / … read more
The BERMAD BC-70F-P Strainer is designed to protect the pipeline and valves from large foreign objects, such as sticks and stones. It is recommended to install the Strainer upstream from control valves, flow meters and other system components.