Manometer Ball Valve

This vented 2-Way Ball Valve provides quick and easy manual isolating and venting of either pressure gauges or any other pressurized control loop components.

3-Way Accelerator Model 54

This 3-Way, single chamber accelerator is a hydraulically operated, diaphragm actuated, pilot that, in response to pressure applied to its control chamber, directs flow and pressure between its ports:  When pressure is applied to its control chamber, it connects port “0” to “2.”  When pressure is released from its control chamber, it connects port “2” … read more

Model 50

This 2-Way, single chamber hydraulic relay valve is a hydraulically operated, diaphragm actuated control valve that either opens fully or shuts off in response to pressure applied to its control chamber.

Chambered Accelerator Model 58

This 3-Way, double chambered accelerator is a hydraulically operated, diaphragm actuated pilot that, in response to command pressure applied to either the upper or lower control chamber, directs flow and pressure between its ports.  When forces in the upper control chamber are greater, it connects port “C” to “A.”  When forces in the lower control … read more

Model 58HC

This 3-Way, double chambered, high capacity accelerator is a hydraulically operated, diaphragm actuated pilot that, in response to command pressure applied to either the upper or lower control chamber, directs flow and pressure between its ports.  When forces in the upper control chamber are greater, it connects port “A” to “C.”  When forces in the … read more

Burkert 6281 Series

This is a diaphragm actuated, servo-assisted pilot operated 2-Way solenoid valve. It is available in two versions: Nֺֺormally Closed (Model: 6218A) Nֺֺormally Open (Model: 6218B)

Y Strainer

The Y Strainer is used for filtration of control fluid with standard potable water quality and standard maintenance.

In-Line Filter

This self flushing In-Line Filter is used for filtration of control fluid of medium and potable water qualities. The flowing fluid continuously flushes the filter element.

Separation Diaphragm Model 35d

This device is used to isolate and protect the pressure sensing chambers of pilots (and pressure gauges) from highly corrosive fluids, high viscosity fluids, or fluids with suspended solids. It has two chambers separated by a diaphragm. The sensed system pressure is introduced to one chamber, applying force on the diaphragm that “transmits” it to … read more

80F-EN

The BERMAD 80F Strainer is designed to remove foreign matter such as stones, sticks etc. from the pipeline. It is recommended to install the Strainer upstream from control valves, flow meters and other system appliances.

Universal Relay Valve (URV)

The URV Universal Relay Valve is a 3-Way or 2-Way multipurpose auxiliary relay valve which responds to a water or air pressure command. It has a high flow capacity and a hydraulically balanced low friction shaft travel. This unique design increases reliability and enables the use of a low command pressure regardless of the system … read more

Plastic Reinforced Control Tubing

The Plastic Reinforced Tubing is used for control circuits of hydraulic controlled valves. Tubing is made from virgin nylon and is available in different sizes. The tube has seamless structure including a Nylon core, Fiber reinforcement and a Nylon jacket. The tubes are 100% pressure tested.