Up To 16 Bar (250 PSI) Archives - Bermad

FP 42T

The BERMAD model 42T is an elastomeric, line pressure driven pilot operated pressure control valve.Designed specifically for advanced fire protection systems and the latest industry standards. The 42T reduces high upstream pressure to a precise, preset, stable downstream pressure. Due to its exceptional reliability and low head loss the 42T is ideal for control of … Continued

Water / Foam Monitor

A monitor is a device with directional control which leads the flow of water, foam or powder to the outlet at different rates and amounts, depending on the dimension of the monitor. Monitors may be mounted on mobile or fixed supports, both on the round or at a certain elevation. They may oscillate automatically, or … Continued

Foam Bladder Tanks

Bladder Tanks are the main component in a balanced pressure proportioning bladder tank system, which require no outside power source other than an adequate water supply. The Bladder Tank is a carbon steel pressure vessel with an internal reinforced neoprene rubber bladder resistant to the corrosion of the water and of the foaming agent with which … Continued

FP 400Y-6M

  The BERMAD model 400Y-6M is an elastomeric, hydraulic, line pressure operated deluge valve, designed specifically for advanced fire protection systems and the latest industry standards. The 400Y-6M is activated by a 3-way solenoid valve which in turn activates a pneumatic relay valve that latches the main valve open until locally reset. The optional valve position indicator can include a … Continued

FP 400Y-3UM

  The BERMAD model 400Y-3UM is an elastomeric, hydraulic, line pressure operated deluge valve, designed specifically for advanced fire protection systems, and the latest industry standards. The 400Y-3UM is activated by a 3-way solenoid valve, which actuates a latching relay valve, to open the main valve. Once open, the main valve will not close until locally reset. The optional valve position … Continued

FP-60F-D/DV

Used in fire protection pipelines primarily to prevent the clogging of fire sprinkler nozzles and other debris sensitve components in water or foam fire systems. The BERMAD FP-60F-01-D/DV is designed for in-line maintenance available with a large diameter flushing outlet for immediate and easy screen cleaning. In addition easy in-line access to the basket screen … Continued

FP 400Y-3DC

  The BERMAD model 400Y-3DC is an elastomeric, hydraulic, line pressure operated deluge valve, designed specifically for advanced fire protection systems and the latest industry standards. The 400Y-3DC is activated by a 3-way solenoid valve by which opening and closing of the deluge valve may be controlled remotely. An integrated pressure reducing pilot ensures a precise and stable pre-set downstream water … Continued

FP 400Y-2MC

  The BERMAD model 400Y-2MC is an elastomeric, hydraulic line pressure operated deluge valve. Designed specifically for advanced fire protection systems and the latest industry standards. The 400Y-2MC is activated by a 3-Way solenoid valve, that actuates a latching relay valve opening the main valve. Once open, the valve will not close until locally reset. An integral pressure reducing pilot ensures … Continued

FP 400Y-3D

  The BERMAD model 400Y-3D is an elastomeric, hydraulic line pressure operated deluge valve, designed specifically for advanced fire protection systems, and the latest industry standards. The 400Y-3D is activated by a 3-way solenoid valve, suitable for electric fire detection systems. The optional valve position indicator can include a limit switch suitable for Fire & Gas monitoring systems. The 400Y-3D … Continued

Automatic Drip Check

  The Automatic Drip Check is used to drain system leakage or accumulated water/fluid from piping systems that need to be kept dry. The normally open Automatic Drip Check will immediately close upon a high increase in flow and automatically re-open upon a decrease of system pressure. The manual release knob can be used to verify that … Continued

FP 430-59

The BERMAD Model FP 430-59 combines fire pump relief with a pre-opening feature to anticipate pump start-up surge. The valve opens fully by means of electric override upon pump start-up, and continues to function as a pressure relief valve. The valve performs reliably in high capacity fire pump systems.