WW 720-DC1-SIGMA

Hydraulically operated, full modulation pressure reducing solution that reduces higher upstream pressure to lower downstream pressure, based on flow or time windows, regardless of fluctuating demand or varying upstream pressure. BERMAD 700 SIGMA EN/ES series valves are hydraulic, oblique pattern, globe valves with a raised seat assembly and double chamber unitized actuator, that can be … read more

FP 400E – 3U

The BERMAD model 400E-3U is an elastomeric, hydraulic, line pressure operated deluge valve, designed specifically for advanced fire protection systems and the latest industry standards. The 400E-3U is activated by a 3-way solenoid valve which in turn activates a 3 way relay valve to open the deluge valve. It is available with a Remote Reset … read more

IR-170-DZbe

The BERMAD Flow Control Valve with Hydraulic Control is a hydraulically operated, diaphragmactuated control valve that limits system demand to a preset maximum flow rate.

WW PCBU Hydraulic Actuator

Bermad PCBU is a Hydraulic Actuator that controls various valve pilots and applications. It serves as an interface between local independent hydraulic control valves and remote control systems. Bermad PCBU responds to hydraulic command signals sent by electronic controller to allow fully automated control over the pilots’ settings.

WW-700\705 SIGMA

BERMAD 700 SIGMA EN/ES series are hydraulically operated, oblique pattern control valves with high cavitation resistance, excellent flow capacity and double chamber unitized actuator, that can be disassembled from the body as a separate integral unit. The valves hydrodynamic body is designed for unobstructed flow path and provides excellent and highly effective modulation capacity for … read more

FP-60F-250

The BERMAD FP-60F-250 Basket Strainers are intended to be installed in fire protection pipelines primarily to prevent the clogging of fire sprinkler nozzles and other debris sensitve components in water or foam fire systems. The BERMAD FP-60F-250 is designed for in-line maintenance available with a large diameter flushing outlet for easy screen cleaning and simple … read more

FP 400E – 3UM

The BERMAD model 400E-3UM is an elastomeric, hydraulic, line pressure operated deluge valve, designed for advanced fire protection systems, and the latest industry standards. The 400E-3UM is activated by a 3-way solenoid valve, which actuates a latching relay valve, to open the main valve. Once open the main valve will not close until locally reset. … read more

DELTA

The DELTA is a stand-out pressure management controller for system optimization. It provides a calmer network, an improved efficiency and a reduction of leakage and bursts. The end result is a reliable water supply and better service for the client. The DELTA is a fully remote controlled fail safe battery operated controller. The DELTA logs … read more

INTEGRATED ORIFICE

The Integrated Orifice can fulfil one or two main functions: The Differential Integrated Orifice is used as part of a flow control valve’s control circuit. Installed at upstream or downstream of the valve, it provides the differential pressure (∆P) to power the flow control pilot. The opening and closing of the pilot causes the flow … read more

Model S9Jn/SS9Jn

This Limit Switch Assembly is an accessory which, enables remote signaling upon the opening or closing of BERMAD Deluge and Water Control Valves. It can be equipped with one or two switches, that are actuated by the opening or closing of the valve. The proximity sensor within the switch is hermetically sealed and responds by … read more

WW-720-45 EN/ES

Hydraulically operated, pressure reducing control valve that reduces higher upstream pressure to lower constant downstream pressure, regardless of fluctuating demand or varying upstream pressure. This valve can be set to two different modulation values through an electric command allowing selection between the two set-points. BERMAD 700 SIGMA EN/ES series valves are hydraulic, oblique pattern, globe … read more

MUT7000

MUT7000 is an electromagnetic flow meter grooved sensor that covers all diameters from DN50 to DN150. When high accuracy, light weight, and compact dimensions are required, the choice of sensors cannot be other than MUT7000. These performances allow to measure low flow rates precisely and repeatable, even in difficult/ problematic applications with solid parts. The … read more