Water Control Solutions
The URV Universal Relay Valve is a 3-Way or 2-Way multipurpose auxiliary relay valve which responds to a water or air pressure command. It has a high flow capacity and a hydraulically balanced low friction shaft travel. This unique design increases reliability and enables the use of a low command pressure regardless of the system … read more
The Plastic Reinforced Tubing is used for control circuits of hydraulic controlled valves. Tubing is made from virgin nylon and is available in different sizes. The tube has seamless structure including a Nylon core, Fiber reinforcement and a Nylon jacket. The tubes are 100% pressure tested.
BERMAD’s V-Port throttling plug is an add-on device for 700 and 800 Series control valves. It provides more accurate, stable and smoother response during pressure and flow regulation, while reducing noise and vibration. The V-port plug is easily mounted under the standard flat seal disc of the valve and changes the ratio of flow to stem travel allowing very … read more
The BERMAD 70F Strainer is designed to remove foreign matter such as stones, sticks etc. from the pipeline. It is recommended to install the Strainer upstream from control valves, flow meters and other system appliances. High Pressure Strainer Model 80F is also available.
This is a direct acting valve, actuated by a pressure responsive diaphragm, which tends to reach equilibrium with the set spring force. Fully balanced trim ensures high accuracy and stability. When used in a pressure reducing circuit, the pilot modulates closed as downstream pressure rises above set point.
BERMAD 700 SIGMA EN/ES series are hydraulically operated, oblique pattern control valves with high cavitation resistance, excellent flow capacity and double chamber unitized actuator, that can be disassembled from the body as a separate integral unit. The valves hydrodynamic body is designed for unobstructed flow path and provides excellent and highly effective modulation capacity for … read more
The BERMAD IR-100 hYflow is at the leading edge of control valve design, providing a valve that is free of the typical limitations associated with standard control valves. A unitized flexible super-travel diaphragm & guided plug provide a significantly ‘look through’ passage resulting in accurate & stable regulation and ultra-high flow capacity. The hYflow unique … read more
The IR-400 Series Valves are virtually free of the typical limitations associated with other diaphragm single chambered valves. The body design includes a full bore seat with an unobstructed flow path. The internal design is using advanced rubber-based materials to achieve a solid, one piece elastomeric assembly including a flexible diaphragm, vulcanized with a rugged … read more
The BERMAD IR-100-DC Series Valves are double chambered hydraulically operated valves which provide: Isolated and protected diaphragm, Stable and accurate regulation performances, Powered opening & closing, non-slam closing characteristic & decreased pressure loss (no spring). Double Chamber actuator assembly design consists of both upper and lower control chambers. Valves can easily be configured, on-site from … read more
The BERMAD Normally Closed Control Valve with Hydraulic Control is a hydraulically operated, diaphragm actuated control valve. The BERMAD Model IR-405-54-KX is a Normally Closed valve, which opens in response to a pressure rise command and shuts in the absence of that command.
The BERMAD Solenoid Controlled Valve is a hydraulically operated, diaphragm actuated control valve that opens and shuts in response to an electric signal.
The BERMAD Hydraulic Control Valve is a hydraulically operated, diaphragm actuated control valve that opens and shuts in response to a local or remote pressure command.